Products – Polyrock Bunded Oil Tanks
PG1000ENV Top Outlet Polyrock Bunded Oil Tank
PG1000BND Bottom Outlet Polyrock Bunded Oil Tank
| Length: | 2150 mm |
|---|---|
| Width: | 710 mm |
| Height: | 1420 mm |
| Actual Capacity: | 1056 litres |
| Nominal Capacity: | 1003 litres |
Product Summary
Bunded plastic oil tank rotationally moulded from premium grade, oil resistant Medium Density Polyethylene featuring a stone effect colourway and supplied complete with:
- 2" Lockable Fill Point with Screw Cap
- 4” Lockable Inspection Aperture with Plastic Screw Cap
- 2” Vent
- Lockable Manhole Access
- Oil Tank Contents Dipstick
- Apollo Electronic Oil Tank Contents Gauge
- Bund Warning Alarm
- LRC Failsafe Overfill Prevention Capability
- Lockable Manhole Access
- 1” BSP Bottom Outlet complete with Oil Tank Fitting Kit - BND models only
- 15mm Top Outlet incorporating Suction Pipe; Isolation Valve and Non Return Valve – ENV Models only
Applications
Suitable for the storage of heating oil at above ground storage installations at agricultural, commercial, domestic, industrial and institutional premises. Satisfies or exceeds all applicable product requirements detailed within:
- The Control of Pollution (Oil Storage) (England) Regulations 2001
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 2003
- The Water Environment (Oil Storage) (Scotland) Regulations 2006
- Environmental Alliance Pollution Prevention Guidelines PPG 2
- Building Regulations throughout the UK and Republic of Ireland
Please note that this oil tank is unsuitable for connection to a fuel delivery system incorporating a flexible hose and trigger nozzle.
ENV Top Outlet Tanks
Top Outlet Oil Tanks are suitable only for connection to fixed appliance incorporating a pressure jet burner or dedicated oil lift equipment. If choosing a Top Outlet Oil Tank, please contact the appliance manufacturer to confirm compatibility.
Installation Requirements
This tank must be installed and maintained by an OFTEC Registered Technician or similarly competent person in accordance with:
- Supplied instructions
- Prevailing statutory requirements
- The requirements of OFTEC Technical Instruction Book 3
Clarehill Plastics Limited will not be responsible for installations which do not comply with these requirements.
Where Can I Buy This Product?
Enter your details to find your local Harlequin reseller...
...or buy online from an Approved Harlequin Reseller
Important Information All Harlequin bunded oil tanks must be installed and maintained by a competent person, in accordance with manufacturer's instructions and prevailing statutory requirements. Clarehill Plastics Limited will not be responsible for installations that do not conform to these requirements. Please note that all images are supplied for reference purposes only. All dimensions and capacities stated are approximate and are understood to be correct at time of publication. However consistent our commitment to continual product improvement, the right is reserved to amend products without notice. Nominal capacities stated are equivalent to 95% of brimful volume.
