Products – Bunded Fuel Stations
2500FS Bunded Fuel Station
| Diameter: | 2090 mm |
|---|---|
| Height: | 1800 mm |
| Weight: | 200 kg |
| Actual Capacity: | 2547 litres |
| Nominal Capacity: | 2547 litres |
Product Summary
Designed specifically to satisfy the fuel storage requirements of agricultural, commercial and industrial Diesel users, New Generation Harlequin Fuel Stations are the most advanced self-contained Diesel Dispensing Solutions available from any UK or European storage tank manufacturer.
The 1400FS model consists of a Bunded Plastic Diesel Storage and Dispensing Tank, rotationally moulded from a premium grade of fuel resistant, Medium Density Polyethylene and supplied complete with:
- NEW 2” BSP Lockable Fill Point with Screw Cap and Chain
- NEW 4” Lockable Inspection Point with Plastic Screw Cap
- NEW Choice of 12v (56lpm), 24v (56lpm), 110v (56lpm), 240v (56lpm) or 240v (72lpm) Electric Pump
- NEW Choice of 10 micron Particulate Filtration or 30 micron Integrated Particulate and Water Filtration
- NEW Choice of 4 metre or 6 metre Fuel Delivery Hose with Three Stage Automatic Shut Off Nozzle
- Fuel Tank Vent
- Oil Tank Contents Dipstick
- Apollo Electronic Oil Tank Contents Gauge
- LRC Failsafe Oil Tank Overfill Prevention Capability
- Lockable Access
- Emergency Isolation Switch
- Bulkhead Light – 240v Models only
- Factory Fitted Electrical Connection Point - 240v and 110v Models only
- Battery Fly Leads – 12v and 24v Models only
- Mechanical Flow Meter with Resetable Batch Totaliser
Options
- NEW Run Dry Pump Protection System which automatically shuts off the pump in the event of the tank running dry and reactivates the system when the tank is refueled.
Applications
Bunded Diesel Storage and Dispensing Tank suitable for the storage and dispensing of Diesel and BioDiesel grades up to B5, produced in accordance with the requirements of BS/IS EN14214 at agricultural, commercial, industrial and institutional premises. This Bunded Diesel Storage and Dispensing Tank or exceeds all applicable product requirements detailed within:
- The Control of Pollution (Oil Storage) (England) Regulations 2001
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations (Northern Ireland) 2003
- The Water Environment (Oil Storage) (Scotland) Regulations 2006
- Environmental Alliance Pollution Prevention Guidelines PPG 2
Installation Requirements
This Bunded Diesel Storage and Dispensing Tank must be installed and maintained by a suitably competent person in accordance withsupplied instructions and prevailing statutory requirements.
All mains electrical connections must be made only by an independently accredited electrician in accordance with prevailing electrical safety requirements and to an RCD protected power supply.
Where Can I Buy This Product?
Important Information All Harlequin diesel storage tanks must be installed and maintained by a competent person, in accordance with manufacturer’s instructions and prevailing statutory requirements. Clarehill Plastics Limited will not be responsible for installations that do not conform to these requirements. Please note that all images are supplied for reference purposes only. All dimensions and capacities stated are approximate and are understood to be correct at time of publication. However consistent with our commitment to continual product improvement, the right is reserved to amend products without notice. Nominal capacities stated are equivalent to 95% of brimful volume.
