Products – Bunded Fuel Stations
1400FS Bunded Fuel Station
| Diameter: | 1570 mm |
|---|---|
| Height: | 1850 mm |
| Weight: | 147 kg |
| Actual Capacity: | 1487 litres |
| Nominal Capacity: | 1413 litres |
Product Summary
Bunded Plastic Diesel Storage and Dispensing Tank, rotationally moulded from a premium grade of fuel resistant, Medium Density Polyethylene and supplied complete with:
- 2” BSP Fill Point with Screw Cap and Chain
- 4” Inspection Point with Plastic Screw Cap
- Fuel Tank Vent
- Oil Tank Contents Dipstick
- Apollo Electronic Oil Tank Contents Gauge
- Oil Tank Bund Warning Alarm
- LRC Failsafe Oil Tank Overfill Prevention Capability
- Lockable Access
- Choice of 12v, 24v, 110v or 240v Electric Pump
- 10 micron Fuel Filtration System - ensuring compliance with the fuel particulate filtration requirements of major vehicle, plant and equipment manufacturers
- 4 metre Fuel Delivery Hose with Automatic Shut Off Nozzle
- Emergency Isolation Switch
- Bulkhead Light – 240v Models only
- Battery Fly Leads – 12v and 24v Models only
Additionally, a factory fitted Flow Meter with Resetable Batch Totaliser can be supplied upon request and at additional cost. Please note that a flow meter cannot be retrofitted at a later date.
Applications
Bunded Diesel Storage and Dispensing Tank suitable for the storage and dispensing of Diesel and BioDiesel grades up to B5, produced in accordance with the requirements of BS/IS EN14214 at agricultural, commercial, industrial and institutional premises. This Bunded Diesel Storage and Dispensing Tank or exceeds all applicable product requirements detailed within:
- The Control of Pollution (Oil Storage) (England) Regulations 2001
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations (Northern Ireland) 2003
- The Water Environment (Oil Storage) (Scotland) Regulations 2006
- Environmental Alliance Pollution Prevention Guidelines PPG 2
Installation Requirements
This Bunded Diesel Storage and Dispensing Tank must be installed and maintained by a suitably competent person in accordance withsupplied instructions and prevailing statutory requirements.
All mains electrical connections must be made only by an independently accredited electrician in accordance with prevailing electrical safety requirements and to an RCD protected power supply.
Where Can I Buy This Product?
Enter your details to find your local Harlequin reseller...
...or buy online from an Approved Harlequin Reseller
Important Information All Harlequin diesel storage tanks must be installed and maintained by a competent person, in accordance with manufacturer’s instructions and prevailing statutory requirements. Clarehill Plastics Limited will not be responsible for installations that do not conform to these requirements. Please note that all images are supplied for reference purposes only. All dimensions and capacities stated are approximate and are understood to be correct at time of publication. However consistent with our commitment to continual product improvement, the right is reserved to amend products without notice. Nominal capacities stated are equivalent to 95% of brimful volume.
