Products – Bunded Fuel Stations
10000FS Bunded Fuel Station
| Length: | 3250 mm |
|---|---|
| Width: | 2800 mm |
| Height: | 3350 mm |
| Weight: | 725 kg |
| Actual Capacity: | 10100 litres |
| Nominal Capacity: | 9595 litres |
Product Summary
Bunded Diesel Storage and Dispensing Tank, rotationally moulded from a premium grade of fuel resistant, Medium Density Polyethylene and supplied complete with:
- Offset 2" Fill Point with Screw Cap, Lever Type Isolation Valve and Non Return Valve
- 4” Inspection Point with Plastic Screw Cap
- Furl Tank Vent
- Duntek 511 Electronic Oil Tank Contents Gauge with inbuilt Overfill Warning Alarm
- Bund Warning Alarm
- LRC Failsafe Overfill Prevention Capability
- Lockable Access
- Choice of 12v, 24v, 110v or 240v Electric Pump
- 10 micron Fuel Filtration System
- 6 metre Fuel Delivery Hose with Automatic Shut Off Nozzle
- Digital Flow Meter
- Emergency Isolation Switch
- Bulkhead Light – 240v Models only
- Battery Fly Leads – 12v and 24v Models only
Additionally, a factory fitted 80 user Fuel Management System can be supplied upon request and at additional cost to all 240v models. Please note that this system cannot be retrofitted at a later date.
Applications
Bunded Diesel Storage and Dispensing Tank suitable for the storage and dispensing of Diesel and BioDiesel grades up to B5. produced in accordance with the requirements of BS/IS EN14214 at agricultural, commercial, industrial and institutional premises. This Bunded Diesel Storage and Dispensing Tank satisfies or exceeds all applicable storage tank product requirements detailed within:
- The Control of Pollution (Oil Storage) (England) Regulations 2001
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations (Northern Ireland) 2003
- The Water Environment (Oil Storage) (Scotland) Regulations 2006
- Environmental Alliance Pollution Prevention Guidelines PPG 2
Installation Requirements
This Bunded Diesel Storage and Dispensing Tank must be installed and maintained by a suitably competent person in accordance with supplied instructions and prevailing statutory requirements.
All mains electrical connections must be made only by an independently accredited electrician in accordance with prevailing electrical safety requirements and to an RCD protected power supply.
Where Can I Buy This Product?
Enter your details to find your local Harlequin reseller...
...or buy online from an Approved Harlequin Reseller
Important Information All Harlequin diesel storage tanks must be installed and maintained by a competent person, in accordance with manufacturer’s instructions and prevailing statutory requirements. Clarehill Plastics Limited will not be responsible for installations that do not conform to these requirements. Please note that all images are supplied for reference purposes only. All dimensions and capacities stated are approximate and are understood to be correct at time of publication. However consistent with our commitment to continual product improvement, the right is reserved to amend products without notice. Nominal capacities stated are equivalent to 95% of brimful volume.
