Products – Bunded Fuel Points
5000FP Bunded Fuel Point
| Length: | 2800 mm |
|---|---|
| Width: | 2200 mm |
| Height: | 2270 mm |
| Weight: | 380 kg |
| Actual Capacity: | 5307 litres |
| Nominal Capacity: | 5042 litres |
ERA Ratings
ERA is a new initiative that allows you to quickly and easily compare the relative risk of an environmental pollution incident originating from different types and different designs of fuel tanks and oil tanks. For more information, visit www.eraratings.org.uk.
This tank is rated as follows:
Product Overview
Bunded Plastic Diesel Storage and Dispensing Tank, rotationally moulded from a premium grade of fuel resistant, Medium Density Polyethylene and supplied complete with:
- 240v Electric Pump with 60lpm Nominal Flow Rate
- 2” BSP Lockable Fill Point with Screw Cap and Chain
- 4” Lockable Inspection Point with Plastic Screw Cap
- LRC Failsafe Overfill Prevention Capability
- Offset 2" Fill Point with Lockable Screw Cap, Lever Type Isolation Valve and Non Return Valve
- Tank Vent
- Lockable Cabinet Access
- 4 metre Diesel resistant Delivery Hose with Three Stage Automatic Shut Off Nozzle
- Bund Warning Alarm
- Emergency Isolation Switch
- Electronic Oil Tank Contents Gauge
Additionally, the following optional tank equipment can be supplied upon request and at additional cost:
- 10 micron Particulate Filter
- Factory fitted Mechanical Flow Meter with Resettable Batch Totaliser
Applications
Bunded Tank suitable for the storage and dispensing of Diesel and BioDiesel grades up to B5, produced in accordance with the requirements of BS/IS EN14214 at agricultural, commercial, industrial and institutional premises. Fully bunded, this tank satisfies or exceeds all applicable product requirements detailed within:
- The Control of Pollution (Oil Storage) (England) Regulations 2001
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations (Northern Ireland) 2003
- The Water Environment (Oil Storage) (Scotland) Regulations 2006
- Environmental Alliance Pollution Prevention Guidelines PPG 2
Installation Requirements
This Bunded Tank must be installed and maintained by a suitably competent person in accordance with supplied instructions and prevailing statutory requirements.
All mains electrical connections to this bunded tank, must be made only by an independently accredited electrician in accordance with prevailing electrical safety requirements and to an RCD protected power supply.
Tankmark is a nationwide network of independent storage tank technicians who can provide the complete tank installation and replacement service.
Click here to arrange a free no obligation, no hassle quotation for the supply and installation of your new Harlequin tank.
Where Can I Buy This Product?
Enter your details to find your local Harlequin reseller...
...or buy online from an Approved Harlequin Reseller
Important Information All Harlequin diesel storage tanks must be installed and maintained by a competent person, in accordance with manufacturer's instructions and prevailing statutory requirements. Clarehill Plastics Limited will not be responsible for installations that do not conform to these requirements. Please note that all images are supplied for reference purposes only. All dimensions and capacities stated are approximate and are understood to be correct at time of publication. However consistent with our commitment to continual product improvement, the right is reserved to amend products without notice. Nominal capacities stated are equivalent to 95% of brimful volume.
