Products – Bunded Fuel Points
1400FP Bunded Fuel Point
| Diameter: | 1570 mm |
|---|---|
| Height: | 1930 mm |
| Weight: | 147 kg |
| Actual Capacity: | 1487 litres |
| Nominal Capacity: | 1413 litres |
Product Overview
Bunded Plastic Diesel Storage and Dispensing Tank, rotationally moulded from a premium grade of fuel resistant, Medium Density Polyethylene and supplied complete with:
- NEW 240v Electric Pump with 60lpm Nominal Flow Rate
- NEW 2” BSP Lockable Fill Point with Screw Cap and Chain
- NEW 4” Lockable Inspection Point with Plastic Screw Cap
- NEW LRC Failsafe Overfill Prevention Capability
- Tank Vent
- Fuel Tank Contents Dipstick
- Lockable Access
- 4 metre Diesel resistant Delivery Hose with Three Stage Automatic Shut Off Nozzle
Additionally, the following optional tank equipment can be supplied upon request and at additional cost:
- NEW 10 micron Particulate Filter
- Apollo Electronic Oil Tank Contents Gauge
- Bund Warning Alarm
- Factory fitted Mechanical Flow Meter with Resettable Batch Totaliser
Applications
Bunded Tank suitable for the storage and dispensing of Diesel and BioDiesel grades up to B5, produced in accordance with the requirements of BS/IS EN14214 at agricultural, commercial, industrial and institutional premises. Fully bunded, this tank satisfies or exceeds all applicable product requirements detailed within:
- The Control of Pollution (Oil Storage) (England) Regulations 2001
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations (Northern Ireland) 2003
- The Water Environment (Oil Storage) (Scotland) Regulations 2006
- Environmental Alliance Pollution Prevention Guidelines PPG 2
Installation Requirements
This Bunded Tank must be installed and maintained by a suitably competent person in accordance with supplied instructions and prevailing statutory requirements.
All mains electrical connections to this bunded tank, must be made only by an independently accredited electrician in accordance with prevailing electrical safety requirements and to an RCD protected power supply.
Tankmark is a nationwide network of independent storage tank technicians who can provide the complete tank installation and replacement service.
Click here to arrange a free no obligation, no hassle quotation for the supply and installation of your new Harlequin tank.
Where Can I Buy This Product?
Enter your details to find your local Harlequin reseller...
...or buy online from an Approved Harlequin Reseller
Important Information All Harlequin diesel storage tanks must be installed and maintained by a competent person, in accordance with manufacturer's instructions and prevailing statutory requirements. Clarehill Plastics Limited will not be responsible for installations that do not conform to these requirements. Please note that all images are supplied for reference purposes only. All dimensions and capacities stated are approximate and are understood to be correct at time of publication. However consistent with our commitment to continual product improvement, the right is reserved to amend products without notice. Nominal capacities stated are equivalent to 95% of brimful volume.
