Products – BioFuel Stations
1400BFS/A BioFuel Station
| Diameter: | 1570 mm |
|---|---|
| Height: | 1850 mm |
| Weight: | 147 kg |
| Actual Capacity: | 1487 litres |
| Nominal Capacity: | 1413 litres |
Product Summary
Bunded plastic BioDiesel storage and dispensing tank, rotationally moulded from a premium, specialist grade of BioDiesel resistant Medium Density Polyethylene and supplied complete with:
- 2" Fill Point with Screw Cap
- 4" Inspection Point with Screw Cap
- Vent
- Apollo Electronic Oil Tank Contents Gauge
- Bund Warning Alarm
- LRC Failsafe Overfill Prevention Capability
- Lockable Access
- 240v Electric Pump
- 10 micron Fuel Filtration System
- 4 metre Fuel Delivery Hose with Automatic Shut Off Nozzle
- Optional Mechanical Flow Meter with Resetable Batch Totaliser
- Emergency Isolation Switch
- Bulkhead Light
Additionally BFA models incorporate the following features:
- Insulated inner tank
- Thermostatically controlled Heat Trace System
Applications
Suitable for the storage and dispensing of Diesel and BioDiesel grades up to B100, produced in accordance with the requirements of BS/IS EN14214 – including national Summer and Winter Fuel requirements for CFPP(1) in the UK and Republic of Ireland - at agricultural, commercial, industrial and institutional premises.
Satisfies or exceeds all applicable product requirements detailed within:
- The Control of Pollution (Oil Storage) (England) Regulations 2001
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 2003
- The Water Environment (Oil Storage) (Scotland) Regulations 2006
- Environmental Alliance Pollution Prevention Guidelines PPG 2
(1) CFPP is the Cold Filter Plug Point which indicates the temperature at or below which a fuel may begin to cause operational problems. British Standard BS EN14214 and Irish Standard IS EN14214 states Summer and Winter requirements within the UK and Republic of Ireland as -5 degrees Celsius and -15 degrees Celsius respectively.
Installation Requirements
This tank must be installed and maintained by a suitably competent person in accordance with supplied instructions and prevailing statutory requirements.
All mains electrical connections must be made only by an independently accredited electrician in accordance with prevailing electrical safety requirements and to an RCD protected power supply.
Where Can I Buy This Product?
Enter your details to find your local Harlequin reseller...
...or buy online from an Approved Harlequin Reseller
Important Information All Harlequin biodiesel storage tanks must be installed and maintained by a competent person, in accordance with manufacturer's instructions and prevailing statutory requirements. Clarehill Plastics Limited will not be responsible for installations that do not conform to these requirements. Please note that all images are supplied for reference purposes only. All dimensions and capacities stated are approximate and are understood to be correct at time of publication. However consistent with our commitment to continual product improvement, the right is reserved to amend products without notice. Nominal capacities stated are equivalent to 95% of brimful volume.
