Products – BioBund BioDiesel Tanks
5400BBT BioBund Bunded BioDiesel Storage Tank
| Diameter: | 2575 mm |
|---|---|
| Height: | 2125 mm |
| Weight: | 325 kg |
| Actual Capacity: | 5307 litres |
| Nominal Capacity: | 5042 litres |
Product Summary
Bunded Tank rotationally moulded from a specialist, BioDiesel resistant grade of Medium Density Polyethylene and supplied complete with:
- Offset 2" Lockable Fill Point with Screw Cap
- 4” Lockable Inspection Aperture with Plastic Screw Cap
- 2” Oil Tank Vent
- Lockable Manhole Access
- Apollo Electronic Oil Tank Contents Gauge
- Bund Warning Alarm
- LRC Failsafe Overfill Prevention Capability
- Lockable Manhole Access
- 1” Top Outlet complete with 80 micron Strainer and Non Return Valve
This Bunded Tank is ideal for connection to pedestal type fuel dispensing units and for the storage of BioDiesel at installations incorporating a fixed, BioDiesel fuelled, combustion appliance.
Applications
Bunded Tank suitable for the storage of BioDiesel grades of up to B100 and manufactured in accordance with the requirements of BS/IS EN14214 at above ground storage installations at agricultural, commercial, domestic, industrial and institutional premises. This Bunded Tank satisfies or exceeds all applicable product requirements detailed within:
- The Control of Pollution (Oil Storage) (England) Regulations 2001
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
- The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations (Northern Ireland) 2003
- The Water Environment (Oil Storage) (Scotland) Regulations 2006
- Environmental Alliance Pollution Prevention Guidelines PPG 2
- Oil storage tank installation requirements contained within Building Regulations throughout the UK and Republic of Ireland
Installation Requirements
This Bunded Tank must be installed and maintained by an OFTEC Registered Technician or similarly competent person in accordance with:
- Supplied instructions
- Prevailing statutory requirements
- The requirements of OFTEC Technical Instruction Book 3
Clarehill Plastics Limited will not be responsible for installations which do not comply with these requirements.
Where Can I Buy This Product?
Enter your details to find your local Harlequin reseller...
...or buy online from an Approved Harlequin Reseller
Important Information All Harlequin biodiesel storage tanks must be installed and maintained by a competent person, in accordance with manufacturer's instructions and prevailing statutory requirements. Clarehill Plastics Limited will not be responsible for installations that do not conform to these requirements. Please note that all images are supplied for reference purposes only. All dimensions and capacities stated are approximate and are understood to be correct at time of publication. However consistent with Clarehill Plastics Limited's commitment to continual product improvement, the right is reserved to amend products without notice. Nominal capacities stated are equivalent to 95% of brimful volume.
